Dark bathrooms
A skylight or solar tube transforms a windowless bathroom into a naturally lit space.
What we handle
What we fix and how we approach it
Hallway interiors
Long hallways with no windows benefit massively from solar tubes that pipe natural light down from the roof.
Kitchen and dining
Larger skylights brighten kitchens and dining rooms, especially in older homes with deep eaves.
Energy reduction
Reduces dependence on electric lighting during the day. Title 24 compliant models reduce heat transfer too.
Resale value
Skylights and solar tubes add measurable value at resale by reducing perceived darkness in older interior spaces.
Our process
From phone call to photo report
Site visit
We measure the room from inside, identify the best roof position, and confirm rafter clearance.
Roof opening
Roof is opened, deck is cut, and the skylight curb or solar tube flashing is installed with the correct integration for your roof type.
Interior framing
We frame the light shaft if needed and finish the drywall on the interior side.
Cleanup and warranty
Full cleanup and manufacturer warranty registration. Photo report of the install.
Why this matters
What you should know before hiring any roofer
Skylights and solar tubes are two different products that solve overlapping problems. A skylight is a window in the roof, typically 24 to 48 inches wide, that brings significant daylight into a room. A solar tube is a smaller reflective tube, typically 10 to 14 inches wide, that pipes daylight down into rooms that cannot accommodate a full skylight. The right product depends on the room and the budget.
Skylight installation on a tile roof is its own specialty. The flashing has to integrate with the tile profile, the underlayment has to be turned up properly, and the curb has to be sized for the tile spacing. Done wrong, a tile roof skylight leaks within two years. Done right, it lasts the life of the roof. We have installed hundreds across LA tile roofs since 1993.
Solar tubes are simpler to install but require thoughtful interior planning. The light comes out of a diffuser on the ceiling, and the tube has to run from the diffuser up to a roof dome with as few bends as possible. Each bend reduces light transmission. We plan the route during the site visit to maximize daylight delivery.
Title 24 California energy code applies to most new skylight installs. We install Velux, Solatube, and other Title 24 compliant products that meet the SHGC and U factor requirements. The compliance documentation goes to the permit office as part of the install paperwork.
Owner promise: An owner or senior roofer is the person who inspects your roof and writes your quote. Not a salesperson. Not a subcontractor. The same person who quotes the job is on site when the work happens.
Customer reviews
What Our Customers Say
Related
Other services and resources
FAQ
Frequently asked questions about skylights and solar tubes
Do skylights leak?
Properly installed skylights do not leak. Most skylight leaks are caused by improper flashing integration, not the skylight itself. We use manufacturer flashing kits and integrate them correctly with the underlayment for the life of the roof.
How much does a skylight installation cost?
Depends on roof type, skylight size, and interior finishing required. Tile roofs are more complex and cost more than shingle. Larger skylights cost more than smaller. We provide a firm written quote during the free in person estimate.
Can you install a skylight on a tile roof?
Yes. We specialize in skylight installation on Spanish tile, mission tile, concrete tile, and flat tile profiles. The flashing integration is the most important part.
What is the difference between a skylight and a solar tube?
A skylight is a window in the roof, typically 24 to 48 inches wide. A solar tube is a 10 to 14 inch reflective tube that pipes daylight down into smaller spaces. Solar tubes are cheaper, less intrusive, and work better in hallways and small bathrooms.
Does the new skylight need to be Title 24 compliant?
Yes for most new installs. We install Title 24 compliant Velux, Solatube, and other brand products that meet California energy code. Compliance documentation is included with the permit paperwork.
Do I need a permit for a skylight?
Most LA jurisdictions require a permit for a new skylight install. We pull the permit as part of the install. The permit cost is included in the written estimate.
Free in person estimate, no pressure
Get a written quote and a photo report on every estimate. Licensed since 1993. Trusted by 5,500+ Los Angeles homeowners.